How to Setup Tp-link Range Extender

Does your wifi signal have troubles reaching every corner of your home? If you have a home or office with thick walls where a wifi signal can’t penetrate then you need a range extender. One of the best extenders available in the market is TP-link range extender. A TP-link range extender simply connects with your existing router wirelessly, expanding and strengthening the signal into the hard-to-reach areas. The TP-Link repeater reduces signal interference in order to ensure reliable Wi-Fi coverage throughout your office and home. If you are currently looking for the answer to the question how to configure my tplink range extender then, you just need to sit back and relax as we will provide you with information on tp link range extender setup using tplinkextender net admin.

Before we begin to configure TP-link range extender, check the hardware connection:

  • First of all, you need to place your TP-Link range extender into a wall outlet near your access point or router.
  • Now you need to connect your range extender to the computer. Take an Ethernet cable; plug its one end into the computer and other-end into your TP-link range extender.

Note: You can also configure your TP- Link range via wireless connection. But it is strongly recommended by the company to configure your TP-Link extender using a wired connection

Let’s begin with tp link range extender setup

In order to expand the coverage area or range of an existing wireless network using tplinkextender net admin, follow the steps which are given below:

  • After completing the hardware configuration, open a web browser on the device which is using for the installation process.
  • Type the TP-link range extender default web address www.tplinkextender.net in the address of the browser window.
  • A window pop-up will appear in front of you asking for username and password. By default, the username and password is ‘admin’.
  • To start the setup process, click on the ‘Quick Setup’.
  • Now, select your ‘Region’ and click on the ‘Next’ option and it will start searching for the available networks nearby you.
  • You need to choose your network from the available wireless network available and click ‘Next’.
  • Enter the username and password of the wireless network you want to extend, if prompted.

Note: You can set the username and password of your TP-link extender same as your router or you can make it different as well.

  • You need to click on the ‘Finish’ button to complete the tp link range extender setup process.
  • Your extender will reboot once to apply these settings.

The TP-Link extender setup process is now completed. In order to check that the connection between the router and your TP-Link extender is established, check if the status LED is solid on the extender.

Finally, you can place your TP-Link range extender wherever you want.

We hope with this blog your query ‘How to configure my tplink range extender?’ is now resolved. If you need any more information on TP-Link range extender configuration, you can simply reach to us via our toll-free number. Our technical experts are live 24/7 and they will be more than happy to assist you.

TP LINK EXTENDER WIRELESS SETUP STEPS

If you have wifi dead zones at your home then you need a range extender. A range extender helps in expanding network coverage in hard to reach areas and an area with no wifi connectivity.  So, you can expand network coverage by just pressing the push button of  Range Extender. Now, the question arises which range extender can offer the above-given feature for your need & the answer is tp link range extender.  A Tp Link extender is certainly the best range extender which you can choose for network expansion. When we talk about tp link extender wireless setup, it is an easy and instant process. You won’t require extra Setup CD or any other additional software for a Tp Link Extender setup. So, without any further delay take a look at basic steps require for Extender setup.

Pre-Requisite for Tp Link Extender Setup

  • Assign an IP address to the computer to match it with range extender’s default IP address.
  • Now, use an Ethernet cable for connecting a computer to the Range Extender, also don’t forget to disconnect wireless from the key router.

Tp Link Extender Wireless Setup

  • First of all, Login to your tp link range extender’s web management page.
  • Connect your computer to the extender’s LAN port via an Ethernet Cable.
  • Next, assign manually a static IP address on your computer, as we mentioned before.
  • Launch a web browser on your device.
  • Now enter tplink extender’s default web address, into browser’s address bar.
  • If you have no knowledge about Tplink extender web address, use extender’s default IP address & then press Enter.
  • After this, provide tp link range extender’s default username and password, into the given fields.
  • By default, a tp link range extender uses Admin as default login credentials
  • When you press enter, after providing default username and password & navigate to Network option. Here you need to ensure tplink extender’s IP address is in the similar IP section with the source router.

If you face an issue, when you try to implement above steps, check below-mentioned troubleshooting tips.

Fix Tp Link Range Extender Setup Issues

Issue: – What If you are not able to access web management page of Tp Link Range Extender?
  • Solution: – First, you need to ensure that your computer is connected to the extended network.
  • You need to check, if your computer is configured to obtain IP address automatically?
  • Try to access web management page of Tp Link Range Extender via an IP address.
  • A Tp link range extender uses 192.168.0.254 as default IP address for login process.

To know more about troubleshooting tips about Tp Link Range Extender Setup Issues call us at our toll-free number. We have a dedicated team for router & extender issues. You can chat with them 24/7 to resolve your queries. If you wish to share your valuable feedback then don’t forget to post comments in the comment box.

Setup TP-Link Wi-Fi Range Repeater

What Is a Wi-Fi Range Repeater and Why Do You Need It?

With an area big enough to prevent the router network signal from reaching each and every corner of your home, you need to have a repeater to let you sit in your home wherever you want to in order to browse an uninterrupted or a weak connection. A range repeater, also named range extender, takes the signal from your existing router and delivers it to the place the router could not.

Based on a number of parameters like Wi-Fi speed, Form Factor, AC Pass-through, and Port, there is a wide range of repeaters TP-Link has introduced into the market. With some of its repeaters being able to give you a combined internet speed of up to 1900Mbps on its dual band devices, TP-Link has evolved as a promising brand. Most of the extenders or repeaters that TP-Link has launched as of now have got no compatibility issues with the router of any model of any brand, which, is a must feature to look for while selecting an optimum product for your use.

Some of its models, like, TP-Link RE580D, and TP-Link RE450, and TP-Link RE305, provide you with one or more than one Gigabit Ethernet Ports. This means you can run the specified number of devices at ten times the speed you get through a conventional Fast Ethernet Port. If you want the extender to not take much of a space, the brand even has a number of models for that as well. TP-Link TL-WA850RE, TP-Link RE200 have wall mounted design, and these won’t take space more than just one electrical power outlet.

When it comes to setting up a TP-Link Wi-Fi Range Repeater/Extender, you do not have stress your mind a bit. Just by following a couple of easy steps, your device would start working for you in no time.

 Setting Up your Wi-Fi Range Repeater

  • Close to your router, plug the extender in to a power source and turn it ON.
  • From the available wireless networks list on your client device, connect to the open network of your TP-Link’s repeater.
  • Launch a web browser in your client device, and in the web address field, type http://tplinkrepeater.net and hit ‘Enter.’
  • In the login prompt that appears on your screen, enter the username and password. If setting up for the first time, default credential for both the fields is ‘admin.’
  • For the secure management of your device, you can create a new username and a new password. Once done, click Confirm.
  • Now select the 2.4GHz network of your router, and enter the wireless password.
  • You can change the SSID of your device for the better security or keep it to the default state. Now click ‘Next.’
  • Once you are over with all the steps given above, click ‘Save. ‘

Troubleshooting

If you face issues while or after configuring your repeater, here are a few solutions for the problems you may encounter.

Login page does not open on typing tplinkrepeater.net

  1. Connect your computer to the repeater if not connected.
  2. Your computer must obtain an IP Address on its own. If it does not, do so by making changes to the settings.
  3. IP Address of the repeater can be used in the place of tplinkrepeater.net
  4. If nothing works, reset the repeater and configure it once again.

Where to reset the repeater?

  • Find a small hole at the rear of the repeater, and use a paperclip or any pointed tool to push the button. Keep the button pressed for about 5 to 10 subsequent seconds. Your repeater is now back to the default settings.

By simply following the above mentioned steps, you have successfully configured your TP-Link Range Repeater or Extender. You device is now ready to serve you.